1. Home
  2. Fountains and Fountain Nozzles
  3. EasyPro Aerating Fountain Nozzles
  4. EasyPro Stainless Steel Foam Jet Fountain Nozzle

EasyPro Stainless Steel Foam Jet Fountain Nozzle

Stainless Steel Fountain Nozzle with 9 Watt Brilliant Underwater LED Fountain Light

Foam Jet Nozzle produces a thick, foaming geyser without fluctuations due to water level.

  • Model: FJT10 (Nozzle Only)
  • Model: FJT10LK (Nozzle with 9 Watt Light)
  • Great for fountains with fluctuating water level
  • Not water level dependent
The low voltage LED fountain lights are IP68 rated and are designed to slip over the top of fountain stand pipes to illuminate formal water features. Transformers and not included with light and must be purchased separately.

Products [1]

Sort by:
EasyPro 1
EasyPro 1" Stainless Steel Foam Jet Fountain Nozzle
$90.24
In Stock Free Shipping
Add To Cart

Stainless Steel Foam Jet Nozzle Spray Height Data:

Part# MPT Inlet Size 1'
GPM    Head		 2'
GPM    Head		 4'
GPM    Head		 6'
GPM    Head		 8'
GPM    Head
FJT10 1"
13 GPM   2' Head
17 GPM   3' Head
22 GPM   5' Head
30 GPM   8' Head
34 GPM  22' Head

 

HOW TO SELECT THE CORRECT PUMP FOR YOUR FOUNTAIN NOZZLE/NOZZLES

To select the correct pump for your fountain please follow the steps below

  • Select the nozzle pattern desired
  • Select the height (or diameter) desired for the nozzle
  • Look at the chart to determine the GPM (or G) and Head (H) required for the nozzle.
  • The pump you choose must have the required GPH flow at the HEAD indicated in order to achieve that size display.
  • The GPM flow at specific HEAD heights will be indicated in the manual or advertising for the pump in question

TIP #1 - for multiple nozzles multiply the GPM required by the total number of nozzles desired. It is not necessary to increase the HEAD when adding multiple nozzles.

Tip #2 - If the pump you are viewing indicates flow in GPH (gallons per hour) instead of GPM (gallons per minute) you can divide by 60. 900 GPH equals 15 GPM.

Tip #3 - Try to select a pump that is slightly more powerful than required to allow for errors in calculation

Tip #4 - All charts assume pump to be posistioned at or near the nozzles. If the distance between pump and nozzle/ nozzles is greater than 10 foot additional HEAD will need to be factored in.

SUGGESTION: If you have questions when calculating your requirements please give us a call at 706-865-0220 and we would be glad to assist you with it.

 
www.bigasstowels.com
We are also extremely proud to offer high quality, AMERICAN MADE, extra large, 100% cotton beach towels.
For our full line of beach and bath towels, please visit BIG ASS TOWELS.
0 Items
TOP