EasyPro JAFT-JAFL Pump Vault Installation Manual

EASYPRO PRO-SERIES PUMP VAULT INSTALLATION INSTRUCTIONS:

Installation Instructions for EasyPro Pro-Series Pump Vaults - Models: JAFT & JAFL

Installation Instructions for Pro Series Pump Vault - Printable PDF Version

Thank you for purchasing an EasyPro Pump Vault. Following are a few simple instructions to help you during the installation process. The JAFT vaults are ideal for pumps up to 3,000 gph, the JAFL vaults are for pumps up to 10,000 gph. These roto molded vaults are ideal for use with mag drive pumps

Optional extensions for deeper reservoirs: part #JAFME fits JAFT - 12" tall, part #JAFVE fits JAFL - 18½" tall

Parts Included:

JAFT: Vault with knock-out for plumbing — 13½" outer diameter x 14¾"" tall, 11½" inner diameter; Lid with knock-out for power cord, 12½" diameter

JAFL: Vault with hole for plumbing — 20" outer diameter x 20½"" tall, 18" inner diameter, lid included

Reservoir Construction - Gravel:

Locate the pump vault anywhere in the reservoir. Fill the reservoir with large stones. The larger the stones, the more void space hence the more water the pit will contain. You can top off the reservoir with smaller stones if you prefer.

JAFT — STONE: 5' x 6' x 1.5' x 7.48 x .4 = 134.6 gallons using stones in the reservoir.

JAFL — STONE: 5' x 6' x 2' x 7.48 x .4 = 179.5 gallons using stones in the reservoir.

Reservoir Construction - Cubes:

Locate the pump vault anywhere in the reservoir. Stack the reservoir cubes around the pump vault. Top off the reservoir with rock and stones to blend into the landscaping. Cover the vault with lid provided.

JAFT — Res-Cubes: 5' x 6' x 1.5' x 7.48 x .9 = 302.9 gallons using reservoir cubes in the reservoir.

JAFL — Res-Cubes: 5' x 6' x 2' x 7.48 x .9 = 403.9 gallons using reservoir cubes in the reservoir.