Top
MENU
Track my Order  |  My Account  |  0 item(s)    View Cart

EasyPro 3/4" Smooth Jet Fountain Nozzle with Built In Adjustment Flow

EasyPro 3/4" Smooth Jet Fountain Nozzle with Built In Adjustment Flow
FCJN75 Smooth Jet Fountain Nozzle with Flow Adjustment
Your Price:$50.39
Retail Price:$55.99
Your Savings:$5.60(10%)
In Stock
Item Condition: New
Free Shipping
Part Number:EP-FCJN75
EasyPro Smooth Jet Nozzles

Smooth Jet Nozzles FCJN Series

  • Part # - FCJN75
  • Inlet Size: 3/4" Inch
  • Swivel Base
  • Built in flow adjustment screw that allows you to easily change spray pattern
  • Female threaded inlet
  • Nozzles can be installed vertically or at an angle
  • Use these nozzles to build custom spray rings
Performance Data:
Part # Inlet Size Nozzle Orifice Size 2' Ft.
GPM / Head
4' Ft.
GPM / Head
6' Ft.
GPM / Head
8' Ft.
GPM / Head
10' Ft.
GPM / Head
SJN50 1/2" in. 3/16" in. 1 GPM / 3' 2 GPM / 5' 3 GPM / 8' 5 GPM / 11' -----
SJN75 3/4" in. 1/4" in. 3 GPM / 3' 4 GPM / 5' 5 GPM / 8' 7 GPM / 11' 8 GPM / 15'
SJN100 1" in. 5/16" in. 5 GPM / 3' 6 GPM / 6' 8 GPM / 8' 9 GPM / 11' 11 GPM / 14'
SJN150 1-1/2" in. 7/16" in. 8 GPM / 3' 11 GPM / 6' 15 GPM / 8' 18 GPM / 11' 21 GPM / 15'
FCJN50 1/2" in. 1/4" in. .07 GPM / 4' 2 GPM / 7' 2.5 GPM / 10' 4 GPM / 12' ----
FCJN75 3/4" in. 5/16" in. 2.5 GPM / 3' 3.5 GPM / 5' 4 GPM / 8' 6 GPM / 10' 7 GPM / 13'
AJN25 1/4" in. 1/8" in. .4 GPM / 4' .6 GPM / 6' .8 GPM / 10' 1 GPM / 12' ----
AJN50 1/2" in. 1/4" in. 1.5 GPM / 4' 2.5 GPM / 6' 3.1 GPM / 10' 3.6 GPM / 12' ----

 

HOW TO SELECT THE CORRECT PUMP FOR YOUR FOUNTAIN NOZZLE/NOZZLES

To select the correct pump for your fountain please follow the steps below

  • Select the nozzle pattern desired
  • Select the height (or diameter) desired for the nozzle
  • Look at the chart to determine the GPM (or G) and Head (H) required for the nozzle.
  • The pump you choose must have the required GPH flow at the HEAD indicated in order to achieve that size display.
  • The GPM flow at specific HEAD heights will be indicated in the manual or advertising for the pump in question

TIP #1 - for multiple nozzles multiply the GPM required by the total number of nozzles desired. It is not necessary to increase the HEAD when adding multiple nozzles.

Tip #2 - If the pump you are viewing indicates flow in GPH (gallons per hour) instead of GPM (gallons per minute) you can divide by 60. 900 GPH equals 15 GPM.

Tip #3 - Try to select a pump that is slightly more powerful than required to allow for errors in calculation

Tip #4 - All charts assume pump to be positioned at or near the nozzles. If the distance between pump and nozzle/ nozzles is greater than 10 foot additional HEAD will need to be factored in.

SUGGESTION: If you have questions when calculating your requirements please give us a call at 706-865-0220 and we would be glad to assist you with it.

Recently Viewed Items