Top
MENU
Track my Order  |  My Account  |  0 item(s)    View Cart

EasyPro 1" Inch Inlet Bronze Smooth Jet Fountain Nozzle SJN100 SJN Series

EasyPro 1" Inch Inlet Bronze Smooth Jet Fountain Nozzle SJN100 SJN Series
SJN100 EasyPro Smooth Jet Fountain Nozzle
Your Price:$44.99
Retail Price:$49.99
Your Savings:$5.00(10%)
In Stock
Item Condition: New
Free Shipping
Part Number:EP-SJN100
EasyPro Smooth Jet Nozzlessmooth jet fountain nozzle

Smooth Jet Nozzles SJN Series

  • Part # - SJN100
  • Inlet Size: 1" Inch
  • Swivel Base
  • Longest nozzle gives best arch - Ideal for long distance sprays
  • Female threaded inlet
  • Nozzles can be installed vertically or at an angle
  • Use these nozzles to build custom spray rings
Performance Data:
Part # Inlet Size Nozzle Orifice Size 2' Ft.
GPM / Head
4' Ft.
GPM / Head
6' Ft.
GPM / Head
8' Ft.
GPM / Head
10' Ft.
GPM / Head
SJN50 1/2" in. 3/16" in. 1 GPM / 3' 2 GPM / 5' 3 GPM / 8' 5 GPM / 11' -----
SJN75 3/4" in. 1/4" in. 3 GPM / 3' 4 GPM / 5' 5 GPM / 8' 7 GPM / 11' 8 GPM / 15'
SJN100 1" in. 5/16" in. 5 GPM / 3' 6 GPM / 6' 8 GPM / 8' 9 GPM / 11' 11 GPM / 14'
SJN150 1-1/2" in. 7/16" in. 8 GPM / 3' 11 GPM / 6' 15 GPM / 8' 18 GPM / 11' 21 GPM / 15'
FCJN50 1/2" in. 1/4" in. .07 GPM / 4' 2 GPM / 7' 2.5 GPM / 10' 4 GPM / 12' ----
FCJN75 3/4" in. 5/16" in. 2.5 GPM / 3' 3.5 GPM / 5' 4 GPM / 8' 6 GPM / 10' 7 GPM / 13'
AJN25 1/4" in. 1/8" in. .4 GPM / 4' .6 GPM / 6' .8 GPM / 10' 1 GPM / 12' ----
AJN50 1/2" in. 1/4" in. 1.5 GPM / 4' 2.5 GPM / 6' 3.1 GPM / 10' 3.6 GPM / 12' ----

 

HOW TO SELECT THE CORRECT PUMP FOR YOUR FOUNTAIN NOZZLE/NOZZLES

To select the correct pump for your fountain please follow the steps below

  • Select the nozzle pattern desired
  • Select the height (or diameter) desired for the nozzle
  • Look at the chart to determine the GPM (or G) and Head (H) required for the nozzle.
  • The pump you choose must have the required GPH flow at the HEAD indicated in order to achieve that size display.
  • The GPM flow at specific HEAD heights will be indicated in the manual or advertising for the pump in question

TIP #1 - for multiple nozzles multiply the GPM required by the total number of nozzles desired. It is not necessary to increase the HEAD when adding multiple nozzles.

Tip #2 - If the pump you are viewing indicates flow in GPH (gallons per hour) instead of GPM (gallons per minute) you can divide by 60. 900 GPH equals 15 GPM.

Tip #3 - Try to select a pump that is slightly more powerful than required to allow for errors in calculation

Tip #4 - All charts assume pump to be positioned at or near the nozzles. If the distance between pump and nozzle/ nozzles is greater than 10 foot additional HEAD will need to be factored in.

SUGGESTION: If you have questions when calculating your requirements please give us a call at 706-865-0220 and we would be glad to assist you with it.

Recently Viewed Items