EasyPro Left/Right ends unassembled (for 3" pipe) Waterfall Spillway Extension

With EasyPro professional waterfall spillways, you can build breathtaking waterfalls without cutting the liner. These EasyPro waterfall spillways are very easy to install and can be expanded and bolted together creating extra wide waterfalls. These Professional Spillways includes a heavy duty rock grate to provide a safe and secure cover on top of the spillway. Easy to hide into the landscape and very user friendly for beginner waterfall builders.

EasyPro Professional Waterfall Spillway Features:

• Straight spillways of 18", 34" and 50" come assembled, curved spillways and spillways over 50" come unassembled due to shipping constraints. The straight, inward and outward pieces are interchangeable and can be used in any combination.
• Dual bulkheads (included) allow incoming water from either or both ends. A plug is included for whichever end is not used.
• Use inward curving pieces to create a concave waterfall, use outward curving sections to create a peninsula with water falling off three sides or use the inward and outward combined together to create an "S" shaped waterfall!
• Easy bolt together assembly - no drilling needed!
• Waterfall spillways are designed to sit inside the liner eliminating any concerns of leaking. The liner simply goes under the spillway and up the back side. The bulkhead fitting secures liner to tub where the hose enters the spillway.
• These waterfall spillways have a plastic grating just below the water level that not only keeps the walls from bowing when buried in the ground, but also allows you to stack 3" - 4" of rock to hide the spillway.
• Dimensions 21" W x 16"D x 18"T

When to use the EWLR3 instead of EWLR2?

• When flow rates over 90 gpm are used on a single inlet
• Or when weir widths over 2.5' are used on a single inlet
• When flow rates over 180 gpm are used on a dual inlet set up
• Or when weir widths over 5' are used on a dual inlet set up

Maximum width weir and flow rate recommendation when using EWLR3

• 6.25' maximum weir on a single 3" inlet with the EWLR3
• 225 GPM max flow recommended on a single 3" inlet
• 12.5' maximum weir on a dual 3" inlet set up with the EWLR3
• 450 GPM max flow recommended on a dual 3" inlet set up

We suggest this helpful article before building your pondless water feature:
Sizing Gravel Filled Water Matrix Reservoirs for Pondless Features

EasyPro Pro-Series Waterfall Spillway Installation - Click to View Instructions