EasyPro 8,000-17,500 GPH High Volume Waterfall and Stream Pumps
 Click for larger image |
TM Low Head Series
- Up to 17,500 GPH flow at 115v
- 3" outlets with 30' power cords and thermal overload protection
- Oil free design - ideal for fish ponds
- Top quality Japanese double mechanical seals
- Part #'s: TM9500, TM13500, TM17500
|
TB High Head Series
- Up to 14,500 GPH flow at 230v
- 3" outlets with 20' power cords and thermal overload protection
- Top quality Japanese double mechanical seals - over 100,000 hour life expectancy
- 230 volt (1 hp available in 230v or 115v)
- Part #'s: TB8000, TB8002, TB12000, TB14500
|
EasyPro TM Series Pumps 9,500-17,500 GPH High Volume Waterfall and Stream Pumps Specifications
| Part # |
GPH Flow |
HP |
Volts Max. Amps |
Max GPM |
Price |
|
| TM9500 |
9500 |
1 |
115/1.09 |
158 |
$767.91 |
|
| TM135000 |
13500 |
1.5 |
115/12 |
225 |
$992.31 |
|
| TM175000 |
17500 |
2 |
230/10 |
290 |
$1229.19 |
|
EasyPro TB Series Pumps 8,000-14,500 GPH High Volume Waterfall and Stream Pumps Specifications
| Part # |
GPH Flow |
HP |
Volts Max. Amps |
Max GPM |
Price |
|
| TM8000 |
8000 |
1 |
115/11 |
133 |
$659.99 |
|
| TB8002 |
8000 |
1 |
230/5.5 |
133 |
$659.99 |
|
| TB12000 |
12000 |
2 |
230/9.7 |
200 |
$1073.03 |
|
| TB14500 |
14500 |
3 |
230/14.5 |
240 |
$1189.03 |
|
 Click for larger image |
 Click for larger image |
EasyPros new TM/TB pumps replace the EP6000-16000 models. The flow charts to the left were created to help you compare between old and new. The TM/TB pumps maintain higher flows at higher head pressure than previous pumps allowing, in many cases, small TM/TB pumps to be used with no reduction in flow. |
 Click for more info |
Use these handy intake screens with any submersible pump when pumping water from a lake, pond, river or tank. These sturdy built screens will protect pump from sticks, weeds, fish and other large debris. Click here for more info. |
Submersible Pump Comparison Chart
 Click Here for Chart Information
| Submersible Pump Price Comparison ChartUse the information on this comparison chart to simplify selecting a pump for a given application. Selecting a pump involves a few steps:
- Determine the flow need: multiply width (in feet) x 36 gpm = flow needed in gpm
- Determine the head pressure in feet (the height the water will rise above the surface of the pond it is being pumped from
- If multiple pumps fit your application you can compare cost to operate, outlet size, etc. finalize your selection.
|
We are also extremely proud to offer high quality, AMERICAN MADE, extra large, 100% cotton beach towels.
For our full line of beach and bath towels, please visit
BIG ASS TOWELS.